Products
Coat-Endure: RF-Admittance Level Switch/Sensor for Stick Solids and Liquids
Compact Admittance Level Limit switch for use in sticky solids, pastes and slurries where dielectric constant K > 2.5
- Application Temperature Range : up to 250° C
- Immune to application material build-up/coating
- Suitable for conductive and non-conductive application media
- Wetted Parts PTFE, SS 304 & SS 316
- Outputs: DPDT Relay, Open Collector PNP Output
- Probe length : 65 mm to 1500 mm
- Certifications : Flame Proof IIC & IP68 Housing
SLA: RF Admittance Type Level Sensor with Buildup immunity
Admittance Level Limit Switch (Use media such as Low dielectric media e.g. cement, fly ash, clinkers, ESP hoppers)
- Application Temperature Range: Up to 1000°C
- Universal Power Supply: 18 to 55 V DC and 90 to 265 V AC at 50Hz
- Remotely mounted electronics upto 15 m
- Available in Integral & remote models
- Coating Immunity specially for sticky and viscous media
- Output: 1/2 SPDT Relay
- Available in Part & Full PTFE Insulation
- Certifications: Flame Proof IIA, IIB & IP65 Housing
- Available in rod & rope type
SLA_B: RF Admittance Type Level Sensor for High Temperature Solids
Admittance Level Limit Switch (Use media such as cement, fly ash, ESP hoppers, powders, sand, sugar, pulverized coal, food grains)
- Application Temperature Range: Up to 1000°C
- Available in remote models
- Remotely mounted electronics for upto 50m
- Unaffected by coating specially for sticky and viscous media
- Wetted Parts: PTFE, Ceramic, Mild Steel, Galvanized Iron, SS 304, SS 310 & SS 316
- Output: 1/2 SPDT Relay with time delay
- Available in rod & rope probe type
- Probe length: 250 mm to 10m
SLA_S: RF Admittance Type Level Sensor with a split Sensor and Evaluation Unit
SLA Series - Admittance Level Limit Switch
- Application Temperature Range : Up to 250°C
- Available in Integral & split models
- Coating Immunity specially for sticky and viscous media
- Output: 1/2 SPDT Relay with time delay, Pump Control Logic
- Certifications: Flame Proof IIA, IIB & IP65 Housing
- Available only in full PTFE insulation
- Probe Type: Only in rod probe
SLA_T-RF Admittance Level Sensor for Sticky media
SLA Tri_Point - Admittance Level Limit Switch
- Application Temperature Range : Up to 250°C
- Available in split model
- Output: One Point Switching, Two Point Switching, Three Point Switching and Pump Control Logic
- Certifications: Flame Proof IIA, IIB & IP65 Housing
- Available in Rod & rope probe
- Probe length: 250 mm to 10m
- Available in part & full PTFE insulation
Clear filters