Steps to configure SD card to be used
- Download "Imager" from raspberry pi official website: https://www.raspberrypi.com/software/
- Take a fresh card.
- Open Imager utility and choose general purpose OS option. In general purpose option, select ubuntu and than Ubuntu 22.04 Server, 64-Bit .
- After selecting the operating system, select the storage. The storage can be of any company. The space matters.
- After selecting storage, click write to start flashing the SD card with ubuntu 22.04 Server OS. Enter the password when prompted. Watch the progress. Once the writing is complete remove the card reader by ejecting it.
- After configuration by the above method, put the card in raspberry pi. To further proceed, you will need a display, keyboard and LAN. Use a HDMI to micro HDMI cable (in case of RPi 4) to connect to HDMI enabled monitor.
- After booting for the first time, you will be asked to login. The default username is ubuntu with default password ubuntu. You will have to change the password as soon as you login for the first tie. Change the password to ******
Last updated 2 weeks ago
Was this helpful?