Level Measurement Solutions in Water & Waste Water Treatment Plant

Liquid Level Sensor - Level Measurement Solutions in Water

Level Measurement in water and waste water treatment plants is essential for efficient monitoring and control of water treatment cycle. Sapcon offers its products with proven design and 30 years of experience in various process industry.

Sapcon offers its perfect solutions for water and waste water treatment plants for different applications like pumping, storage and pipe lines including simple control switching and precise monitoring of water to avoid wastage and dry run.

  1. SAPCON’S LEVEL TRANSMITTERS FOR CONTINUOUS MONITORING

  1. SAPSONIC

SAPsonic is a non-contact type level measurement transmitter for continuous monitoring of liquids. It has an integral electronic module for measuring level along with a trans-receiver. SAPsonic is compact and easy to install. It has a robust construction with IP-65 protection. SAPsonic is suitable for all non foaming and non fuming liquids.

Features:

  • Range: 8 meters
  • Analog 4-20mA output
  • Accuracy: 0.5% of max range
  • Beam Angle: 10°
  • Universal Power supply AC / DC
  1. Microprocessor Based Continuous Level Indicator

MPILC is a continuous level measurement solution for all kinds of raw and DM water. It has a probe (Rod / Rope) and an evaluation unit with 2 wire interconnection. It can be efficiently used for continuous monitoring of water storage tanks, sumps & pits.

Features:

  • Remote display in percentage (%)
  • Analog 4-20mA output
  • 3 x SPDT relay output
  • 2 – wire interconnection
  • Universal Power supply AC / DC
  1. CAPVEL (2-Wire)

CAPVEL is a capacitance-based continuous monitoring level transmitter. It is suitable for continuous monitoring of water level with true 2-wire circuit.

Features:

  • Compact size & easy to install
  • Analog 4-20mA output (2-wire), RS – 485
  • Accuracy: 2-3% of max range
  • Temperature durability up to 200°C
  • Power supply range: 24-50 V DC
  1. SAPCON’S LEVEL SWITCHES FOR POINT LEVEL SWITCHING

  1. CONDUCTIVITY LEVEL SWITCH

SAPCON’S Conductivity type level switch is a highly efficient point level switch for conductive media. Conductivity level switch can be used for liquids having conductivity more than 25micro Siemens. Conductivity level switch can be used to switch off pump to avoid over flow in water tanks and also to maintain constant level to avoid water wastage.

Features:

  • No moving parts, free from maintenance
  • No special cable required for interconnection; economical solution
  • Low current on probe for operational safety
  • Variety of control functions available; two point, three point & pump control switching AC on probes for prevention of electrolytic deterioration of electrodes
  1. CAPACITANCE TYPE LEVEL SWITCH

Sapcon’s Capacitance type level switch is suitable for accurate point level switching. The instrument is based on the principle of capacitance being in contact with the liquid to energize relay. The electronic insert measures the change in capacitance by using radio frequency.

Features:

  • High temperature sustainability
  • Calibration possible from remote location
  • Available in different mounting styles
  • Recommended solution for DM water & condensate water
  • Universal Power supply 90-265 V AC/ 24 V DC
  1. TUNING FORK TYPE LEVEL SWITCH

Elixir is a tuning fork based point level switch. The tines are kept vibrating on a fixed frequency and the change in frequency is determined when the liquid touches the tines and energizes the relay to changeover. This level switch is unaffected by electrical properties of liquid and can also work in liquids having viscosity up to 10,000 cP.

Features:

  • Independent of liquid properties
  • 2 SPDT relays with inbuilt delay settings
  • Compact size and easy to install
  • Suitable for high temperature up to 200°C
  • Power supply: 90-265 V AC / 11-55 V DC
  1. SAPCON’S SOLUTIONS FOR DIFFERENT APPLICATIONS

  1. Integrated Building Management System (IBMS)

Overhead & Underground Tanks:

  • To avoid water overflow and tank emptiness
  • Suited for building management system
  • No moving parts
  • Reliable, faithful, accurate switching
  • IP approved, industrial-grade equipment
  • Can be used in buildings, hospitals, malls & hotels

Fuel Monitoring in DG sets and Diesel storage tanks:

  • To avoid pilferage and wastage of expensive fuel like diesel
  • To ensure that DG sets have diesel when required
  • Generate fuel consumption pattern
  1. Tank management for municipal corporation water tanks
  • Automation in the network of tanks spread across different geographical limits such as city, residential establishment & township

Sapcon offers its pressure-based level sensor Model, STELLAR, which brings with it the following features:

  • High Accuracy
  • Excellent repeatability in large tanks
  • Display in mm, percentage and volume
  • Two SPDT relays for high & low level alarms
  • RS-485/4-20 mA output can be fed in GSM in remote monitoring
  • Ensures better water supply management to consumer by preventing water emptiness and tank overflow
  1. Water treatment and Effluent Treatment Plants

Sapcon offers a complete solution for point, multi point and continuous monitoring of:

  • Pure & Raw water in tanks wiers or Dams
  • Contaminated & Effluent water
  • Solution for Rate of flow (RoF) (with inbuilt totalizer) and Loss of Head (LoH) using ultrasonic and capacitance principle