Smart SSI

Fuel Level Sensor & Transmitter - Liquid Level Measurement Solution

With the cost of fuel increasing by the hour it has become inevitable to use fuel judiciously and completely stop its misuse, pilferage and wastage. Conventional float break easily due to wear and tear and it is tough to control fuel pilferage using floats.

Using an experience of over 30 years in level instrumentation, for the last six years, SAPCON has launched special fuel level sensor designed to application. More than 20,000 references in this industry segment for fuel level sensing gives us the required know how of operation and practical field experience.

Applications:

  1. Vehicle Tracking System
  2. Fuel Storing Tanks
  3. DG Sets
  1. Vehicle Tracking System
  • Turbulance get compensated due to uneven road
  • Fuel Pilferage enroute
  • Remote monitoring of fleet
  • Efficiency of vehicle

Sapcon’s Solution

A typical system consists of SAPCON fuel level sensor, GPS transmission system and remote indication device i.e PC or a laptop (see figure). SAPCON fuel level sensor gives the output in the form of mA or voltage output that has to be connected with the user’s GPS tracking system. GPS system further transmit the signal to take out put of exact level on a computer or laptop.

(Insert Figure titled “SysDiag_Fuel.png”)

CAPVEL is a capcitance based fuel level trasnsmitter based on the principle of parallel plate capcitor. It can be used for continuous monitoring of fuel or any other liquids.

Unique Features

  • Universal DC supply range 09-30 V DC.
  • Two/Three – wire sensor, Galvanically isolated 4-20mA o/p.
  • Turbulance compensation.
  • Digital RS-485 Modbus-RTU protocol for remote communication
  • Voltage out put range from 1-5 and 2-10 volts.
  • Automatic Temperature compensation.
  • Suitable for wide range of liquids.
  • Low Cabling cost.
  1. Fuel Storing Tanks

Sapcon has proven in its technology for the past 30 years and all the instruments manufactured with international codes and standards. Our sensors are CE marked and tested for the higher IP protection grade.

Sapcon’s Solution

SAPCON SLC series is a compact level switch suitable for single / multi point level switching.

Unique Features

  • Remote as well as integral electronics
  • Available in various mounting sizes
  • Relay / PNP output
  • Works on both 90-265 V AC / 24 V D
  • Multipoint can be adjusted on a single rod

SAPCON has two more high feature products which can be used in tanks storing fuel, Elixir and Elixir-T.

Unique Features of Elixir-T

  • Vibrating fork for liquid level sensing in tube type housing
  • Factory calibrated to be Plugn Play at site
  • Immune to process related unwanted vibrations
  • Popular with hygiene conscious end-user
  • Available in full SS-304/SS-316 construction
  • Variety of process connections – 1”, 3/4” 1/2” (NPT/BSP), hygienic tri-clamp arrangement
  1. DG Sets
  • Remote site – Tough approah
  • Large quantity of fuel
  • Possibility of adultration
  • Remote monitoring at substations

Sapcon’s Solution

CAPVEL is a capcitance based fuel level trasnsmitter based on the principle of parallel plate capcitor. It can be used for continuous monitoring of fuel or any other liquids.

Unique Features of Capvel

  • Universal DC supply range 09-30 V DC.
  • Two/Three – wire sensor, Galvanically isolated 4-20mA o/p.
  • Turbulance compensation.
  • Digital RS-485 Modbus-RTU protocol for remote communication
  • Voltage out put range from 1-5 and 2-10 volts.
  • Automatic Temperature compensation.
  • Suitable for wide range of liquids.
  • Low Cabling cost.

SAPCON has one more high feature product which is a microcontroller based capacitance level indicator. It comes with seperate evaluation unit and can be connected through a normal two core cable.

Unique Features of MPILC

  • Remote Indication 0-100%
  • Two wire signal transmission, hence low cabling cost
  • Galvanically isolated 4-20mA output
  • Works on both 90-265 V AC / 24 V D
  • Continuous monitoring along with 03 independent relays
  • Available in rod / rope probes.

Generally some sensors are also required with flame proof enclosures, so Sapcon offers its intinsically safe two wire system with flame proof enclosure approved by CMRI, BIS and PESO.

 

Why SAPCON

  • Over 30 years of establishment with strong technical know how
  • Compact size of instruments to fit with vehicles and in DG sets
  • Supplied to most of the telecom industries, service provider, fleet owners and Fleet mangers
  • Quick delivery for volume orders
  • Safe housing with higher IP protection
  • CE, ISI marked product with national approval of Petroleum and safety organisation
  • True customization as per user’s specifications
  • Adjustable flange arrangement to adjust probe length for different tanks

References

  • Acme Telepower
  • Aircell
  • Vodafone
  • Idea Cellular
  • MTN Mobile
  • Sun Steering Wheels
  • Punj lloyd
  • Jackson
  • Bharat Oman Refinary
  • Shriram Transport
  • Eicher Motors
  • Ashok Layland
  • Delhi Metro